服務熱線: 0531-68828688
新聞資訊
您當前位置: 首頁 - 新聞資訊 - 行業快訊
企業新聞行業快訊政府關懷黨政活動
中空玻璃生產線的磨損如何解決?

2021.08.18威力智能

中空玻璃生產線的磨損如何解決,目前關于中空玻璃生產線磨損尚無統一的分類方法,大體可概括為兩類:一類是根據磨損結果對磨損表觀的描述,如點蝕磨損、膠合磨損、擦傷磨損等;另一類是根據摩擦機理,分磨粒磨損、粘著磨損、疲勞磨損、腐蝕磨損等。
How to solve the wear of insulating glass production line? At present, there is no unified classification method for the wear of insulating glass production line, which can be summarized into two categories: one is the description of the wear appearance according to the wear results, such as pitting wear, gluing wear, scratch wear, etc; The other is divided into abrasive wear, adhesive wear, fatigue wear, corrosion wear and so on according to the friction mechanism.
1.中空玻璃生產線粘著磨損,在切向力的作用下,摩擦副表面的吸附膜和服污膜遭到破壞,使表面的輪廓峰在相互作用的各點處發生冷焊,由于相對運動,材料便從一個表面轉移到另一個表面,形成粘著磨損。

1. Adhesive wear of insulating glass production line. Under the action of tangential force, the adsorption membrane and service membrane on the surface of friction pair are damaged, so that the contour peak of the surface is cold welded at each point of interaction. Due to relative movement, the material is transferred from one surface to another, forming adhesive wear.

在此過程中,有時材料也會再次附著回原表面,出現逆轉移,或脫離所粘附的表面而成為游離顆粒。載荷越大,表面溫度越高,粘著的現象也越嚴重。嚴重的粘著磨損會造成運動副咬死。粘著磨損是金屬摩擦副之間普遍的一種磨損形式。
In this process, sometimes the material will adhere back to the original surface, reverse transfer, or separate from the adhered surface and become free particles. The larger the load is, the higher the surface temperature is, and the more serious the adhesion phenomenon is. Severe adhesive wear will cause the moving pair to bite. Adhesive wear is a common form of wear between metal friction pairs.
2.中空玻璃生產線磨粒磨損從外部進入摩棕面間的游離硬質顆粒(如塵土或磨損造成的金屬微粒)或硬的輪廓峰尖,在較軟材料表面犁刨出很多溝紋而引起材料脫落的現象,稱為磨粒磨損。磨粒磨損與摩擦副材料的硬度和磨粒的硬度有關。有時選用較便宜的材料,定期更換易磨損的零件,更符合經濟原則。
2. Abrasive wear of insulating glass production line is the phenomenon that free hard particles (such as dust or metal particles caused by wear) or hard contour peaks entering between the rubbing Brown surfaces from the outside, plough out many grooves on the surface of softer materials, resulting in material falling off, which is called abrasive wear. Abrasive wear is related to the hardness of friction pair materials and abrasive particles. Sometimes, it is more economical to choose cheaper materials and replace easily worn parts regularly.
3.中空玻璃生產線疲勞磨損,在變接觸應力的作用下,如果該應力超過材料相應的接觸疲勞極限,就會在摩擦副表面或表面以下一定深度處形成疲勞裂紋,隨著裂紋的擴展及相互連接,金屬微粒便會從零件工作表面上脫落,導致表面出現麻點狀損傷現象.即形成疲勞磨損或稱疲勞點蝕。
3. For the fatigue wear of insulating glass production line, under the action of variable contact stress, if the stress exceeds the corresponding contact fatigue limit of the material, fatigue cracks will be formed on the friction pair surface or at a certain depth below the surface. With the expansion and interconnection of cracks, metal particles will fall off from the working surface of parts, It leads to pitting damage on the surface, that is, fatigue wear or fatigue pitting corrosion.
聯系我們

全國銷售熱線:

0531-68828688 87987918

郵箱:jnweljq@weiliglass.com

地址:

山東省德州市齊河縣劉橋鎮齊劉路002號

立即訂購

山東省德州市齊河縣劉橋鎮齊劉路002號
0531-68828688 87987918
www.weiliglass.com
中文字幕无码不卡免费视频,国内精品一区二区三区,亚洲一级av在线,国产高清在线精品一区小说,久久综合伊人77777 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>